Downloads

Voltsec Control Panel

The Voltsec Control is used for programming your Voltsec Security System as well as installing all the necessary software on your Raspberry Pi and any Arduino expansion boards.

Details
Version:
4.2.94.0
Date Published:
9/24/2024
File name:
VoltsecControlPanel-4.2.94.0-setup.msi
File size:
73.1 MB
System Requirements
  • Windows 10
  • .NET Framework 4.7.1 or higher
Installation Instructions
Once downloaded, you can run the installer to install the Voltsec Control Panel.

Voltsec WinAlerts Coming Soon

WinAlerts is a new product from Retinasoft that will show push notifications on your Desktop PC, as well as enabling a privacy mode that you can customize the behavior of certain apps if a fault is detected.

Raspberry Pi OS (64-bit)

The Operating System for the Raspberry Pi. The Voltsec Control Panel will automatically download this file for you. However, as this is a large download, you can download the file from here and extract the .img file if you are going to be installing the system somewhere that has slow download speeds.

Details
Version:
2024.7.4.0
Date Published:
7/4/2024
File name:
2024-07-04-raspios-bookworm-arm64.img.xz
File size:
1142 MB
System Requirements
  • pi5-64bit
  • pi4-64bit
  • pi3-64bit
Installation Instructions
Download the .zip file and unzip (extract) the .img file. Use the Voltsec Control Panel to flash the SD card with the .img file. See the tutorial section for additional information.

Raspberry Pi OS (Legacy, 64-bit)

The Operating System for the Raspberry Pi. The Voltsec Control Panel will automatically download this file for you. However, as this is a large download, you can download the file from here and extract the .img file if you are going to be installing the system somewhere that has slow download speeds.

Details
Version:
2024.7.4.0
Date Published:
7/4/2024
File name:
2024-07-04-raspios-bullseye-arm64.img.xz
File size:
866 MB
System Requirements
  • pi4-64bit
  • pi3-64bit
Installation Instructions
Download the .zip file and unzip (extract) the .img file. Use the Voltsec Control Panel to flash the SD card with the .img file. See the tutorial section for additional information.

Raspberry Pi OS (Legacy, 32-bit)

The Operating System for the Raspberry Pi. The Voltsec Control Panel will automatically download this file for you. However, as this is a large download, you can download the file from here and extract the .img file if you are going to be installing the system somewhere that has slow download speeds.

Details
Version:
2024.7.4.0
Date Published:
7/4/2024
File name:
2024-07-04-raspios-bullseye-armhf.img.xz
File size:
901.7 MB
System Requirements
  • pi4-32bit
  • pi3-32bit
  • pi2-32bit
  • pi1-32bit
Installation Instructions
Download the .zip file and unzip (extract) the .img file. Use the Voltsec Control Panel to flash the SD card with the .img file. See the tutorial section for additional information.
Mobile Apps